SATA & IDE PCI Raid Card

The SATA PCI Cards are compliant with Serial ATA 1.0 specifications to upgrade your desktop computer to allow Dual Serial ATA RAID Channels and one Parallel ATA (IDE) Host controller to support up to two devices.
The PCI Cards provide two fully compliant Serial ATA ports to access.

Striping (RAID 0) and Mirroring (RAID 1) are supported to improve data performance and provide data redundancy.

Product Code: NL-SATAPCI

Please login to buy

Product InformationAssociated ProductsDetails / DownloadsFAQs

Specification

Serial ATA - 1.5 Gbps (150 MB/s)
Compliant with Serial ATA 1.0 Specification
Supports 48-bit LBA (Large Disk), hard drives larger than 137 GB
Supports spread spectrum clocking to reduce EMI
Registers as compatible with Parallel ATA
Single, digital PLL architecture with 1 PLL for both channels

Serial ATA Interface

Supports SATA 1.0 (High Speed Serialised AT Attachment, Revision 1.0), 1.5 Gb/s data rate
Completely software transparent with Parallel ATA
Supports Host adaptor register Interface (SCR, Status and Control Registers)
Supports 48-bit LBA (Large Disk), hard drives larger than 137 GB

Parallel ATA Interface

Supports Ultra DMA Mode transfers up to Mode 6 Timing (133 Mbytes/sec)
Supports 48-bit LBA (Large Disk), hard drives larger than 137 GB
Supports PIO Modes up to Mode 4 Timings, and Multiword DMA Mode 0,1,2 with Independent timing of up to 2 drives
Supports Tri-State IDE Signals

Product Range

SATA & IDE PCI Raid Card

Find Stockists...

Specification

Serial ATA Interface

Parallel ATA Interface

Associated Products

Product Details

Product Downloads and Links

Images

Product FAQs