(0)
£0.00 (ex. VAT)
NEWlink SATA & IDE PCI Raid Card
Hover over image to zoom.

NEWlink SATA & IDE PCI Raid Card

code: NL-SATAPCIEXT
Item in Stock  |  Usually dispatched within 24 hours
Order within 7 Hrs and 10 Mins for delivery on Monday 25th September
This product has been added to your basket...
  • Continue Shopping
  • Checkout

The NL-SATAPCIEXT is a SATA PCI card which is compliant with Serial ATA 1.0 specifications to upgrade your desktop computer to allow dual Serial ATA RAID channels and one Parallel ATA (IDE) host controller to support up to two devices. The NL-SATAPCIEXT card provide two fully compliant Serial ATA ports (1 internal & 1 external) to access Striping (RAID 0) and Mirroring (RAID 1) which is supported to improve data performance and provide data redundancy.

  • 1 Serial ATA External Port
  • 1 SATA Internal Port
  • 1 Parallel ATA Host Card
  • Serial ATA - 1.5 Gbps (150 MB/s)
  • Compliant with Serial ATA 1.0 Specification
  • Supports 48-bit LBA (Large Disk), hard drives larger than 137 GB
  • Supports spread spectrum clocking to reduce EMI
  • Registers as compatible with Parallel ATA
  • Single, digital PLL architecture with 1 PLL for both channels
  • Supports SATA 1.0 (High Speed Serialised AT Attachment, Revision 1.0), 1.5 Gb/s data rate
  • Completely software transparent with Parallel ATA
  • Supports Host adapter register Interface (SCR, Status and Control Registers)
  • Supports 48-bit LBA (Large Disk), hard drives larger than 137 GB
  • Supports Ultra DMA Mode transfers up to Mode 6 Timing (133 Mbytes/sec)
  • Supports 48-bit LBA (Large Disk), hard drives larger than 137 GB
  • Supports PIO Modes up to Mode 4 Timings, and Multiword DMA Mode 0,1,2 with IndependentTiming of up to 2 drives
  • Supports Tri-State IDE Signals
  • Windows 98SE/ME/2000/XP

Please contact us for our Delivery & Returns Policy

'); -->