(0)
£0.00 (ex. VAT)
NEWlink Bi-Directional SATA to IDE Adapter
Hover over image to zoom.

NEWlink Bi-Directional SATA to IDE Adapter

code: NL-SATADUALADAPT
Item in Stock  |  Usually dispatched within 24 hours
Order within 10 Hrs and 24 Mins for delivery on Tuesday 21st November
This product has been added to your basket...
  • Continue Shopping
  • Checkout

The NL-SATADUALADAPT is a bi-directional converter for serial and Parallel ATA translation. The Serial ATA physical, link, and transport layers are compliant to serial ATA 1.0. The NL-SATADUALADAPT converter supports a 1.5GHz data rate. The application layer supports both the ATA register command set and packet command set, which could drive both hard disk drive and ATAPI optical storage such as CR-ROM, CD-RW, DVD-ROM, DVD-RW, etc. The Serial ATA and the Parallel ATA application layer support both host and device operation.

Easy to install and setup, simply connect devices and slide switch to correct position. The switch works by selecting which mode the IDE connector is to be used. If converting a SATA device to IDE choose HOST and when converting IDE device to SATA select DEVICE.

  • Marvell chipset
  • Serial ATA 1.0 specification compliant
  • Automatic Serial ATA 1.5Gbps speed negotiation
  • ATA/ATAPI PIO mode 0 to 4
  • ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133 and 150MB/s
  • Support Serial ATA hot-plug
  • Ultra low power consumption
  • Works for both AC and DC between the transmitter and the receiver
  • Support Partial/Slumber power management

Please contact us for our Delivery & Returns Policy

'); -->