120m HDMI Extender over 1x Patch Cable

The HDMI Extender allows you to transmit a HDMI signal over Ethernet using the HDBitT transmission protocol. You can transmit a HDMI signal all around your house or office using a single Cat5e/Cat6 cable.

The Plug and Play design is very easy to use simply connect both units to the HDMI devices, connect the I/R adapters and plug them into the extenders.

The extender can transmit 1080p(60Hz) up to 120 Metres(using Cat6 cable).

Multiple receivers can can used with single sender, making it possible to extend one source to multiple displays using our HD-EX345-120-RX.

There are three ways which these can be used, Point to Point which uses one sender and one receiver link by a single networking cable. Point to Point through a networking hub or switch. One to Many, which uses one sender, an unmanaged, gigabit networking hub and multiple receivers.

Please the diagram on the left hand side.   

• HD-EX345-120 Sales Sheet

• Supports up to 1080p @ 50/60Hz
• Supports HDCP
• Supports 20~60KHz IR devices
• Supports local loop output
• Supports IR passback

Contents

• 1 x HDMI Sender
• 1 x HDMI Receiver
• 1 x IR Blaster
• 1 x IR Receiver
• 2 x PSU's
• 1 x User Manual

Please contact us for our Delivery & Returns Policy