£0.00 (ex. VAT)
HDMI Extender over Single Patch Cable (4K)
Hover over image to zoom.

HDMI Extender over Single Patch Cable (4K)

code: HD-EX354K
Item out of Stock  |  Usually dispatched within 24 hours
This product has been added to your basket...
  • Continue Shopping
  • Checkout

The HDMI HDBaseT Extender enables an HDMI display to be located up to 70 metres away from the source device. It can conveniently be extended using only one Cat5e / 6 / 6a / 7 cable, which is cost-effective.

It not only supports HDMI (3D, Deep Colour) but also Ultra HD (4k x 2k) and is HDCP compatible. It is perfect for the meeting room, home theater or any installation that needs long distance transmission and superior video quality.

  • Extends the distance between HDMI source and HDMI display
  • Implements HDBaseT extension technology using only one Cat 5e / 6 / 6a / 7 cable to connect the transmitter and receiver
  • HDMI (3D, Deep Colour, 4kx2k@60Hz); HDCP v1.4 Compatible
  • Anti-jamming – resists signal interference during high-quality video transmission using HDBaseT technology
  • Supports resolutions of up to Ultra HD 4kx2k and 1080p Full HD
  • Supports up to 340MHz bandwidth for high performance video
  • Signaling rates up to 3.4 Gbits
  • Supports Dolby True HD and DTS HD Master Audio
  • Built-in 8KV / 15KV ESD protection (Contact voltage 8KV; Air voltage 15 KV)
  • Support 20-60kHz wide frequency devices and Bi-directional IR transmission.
  • Power consumption: TX: <3.5W; RX <6W
  • Product dimension: 98.5(L)*96.5(W)*23(H) mm

• Using Cat5e / Cat6
• 60m for up to 1080P @ 60Hz 36bpp
• 35m for 1080p @ 60Hz 48bpp
   1080P @ 60Hz 3D
   4kx2k @ 30Hz

• Using Cat6a / Cat7
• 70m for up to 1080P @ 60Hz 36bpp
• 40m for 1080P @ 60Hz 48bpp
   1080P @ 60Hz 3D
   4kx2k @ 60Hz



  • 1 x TX
  • 1 x RX
  • 1 x PSU
  • 1 x TX IR Sensor
  • 1 x RX IR Sensor
  • 1 x User Manual

Please contact us for our Delivery & Returns Policy

'); -->