NEWlink 50Mtr USB 1.1 Extender Over Cat5e

Compliant with the standard specification of USB1.1 Patented ASIC (Application Specific Integrated Circuits) built-in 10/100 Base-T Ethernet interfaces for easy extension No driver required Supports Windows 10/11 Supports Mac OS 9.x or above Maximum length: 50m

150m USB 2.0 Over Ethernet Extender - 4 Ports

Compatibility: USB 2.0, compatible with USB1.1, USB1.0 Transmission Rate: High-Speed (480 Mbps), Full-Speed (12 Mbps), Low-Speed (1.5Mbps) Transmission Distance: CAT5e ≤ 100m, CAT6 / 6A / 7 ≤ 150m Supports USB Hot-Plug Operating System: Windows, MacOS, Linux and Android 4x USB-A Input 1x USB-A Output Follows IEEE-568B standard

NEWlink USB2.0 Ethernet Adapter 10/100 Mbps

Compliant with USB 2.0 and USB 1.1 specifications Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards Supports both Full-Duplex and Half-Duplex operations Supports Wake-on-LAN function Powered by USB port only Plug & Play Supports Windows 10 and Mac OS X 10.x

NEWlink USB-C Gigabit Lan Adapter with 3 Port USB-A Hub

Combination of USB3.1 and Gigabit Ethernet USB3.1 Gen 1 Super Speed transfer up to 5Gbps Backward compatible with USB3.0/2.0 Gigabit Ethernet provides a fast and stable internet connection Supports IPv4 / IPv6 network, full duplex, automatic flip and flow control Supports power management, remote wake-up function and Gigabit network power automatic adjustment LED Ethernet status indicator

USB 2.0 Gigabit Ethernet Adapter

Integrates on-chip USB 2.0 PHY and controller compliant to USB Spec 2.0, and 1.1 Supports USB Super/High/Full Speed modes with Bus-power Self-power device auto-detect capability Supports IEEE 802.3, 802.3u and 802.3ab Supports parallel detection and automatic polarity correction Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU loading Supports TCP Large Send Offload V1 Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control Supports IEEE 802.1P Layer 2 Priority Encoding and Decoding PHY loop-back diagnostic capability Supports Wake-on-LAN Function Supports suspend mode and remote wakeup via link-change, Magic Packet, Microsoft Wakeup Frame and external wakeup pin Supports up to Windows 11 and mac OS 12 ASIX AX88178A chipset

50m USB 2.0 Over Cat5e Extender

Support for any High-Speed (480Mb/s), full-speed (12 Mb/s) or low-speed (1.5 Mb/s) USB devices Allows a USB device to have its cable length extended up to 50m Support suspend/resume detection Supports Hot Plug No software driver required Supports up to Windows 10

NEWlink USB3.0 Gigabit Ethernet Adapter with Hub

Small, portable design Supports Wake-on-LAN function Supports Green Ethernet Supports IEEE 802.3az (Energy Efficient Ethernet) Supports IP v4 / IP v6 pack Checksum Offload Engine (COE) to reduce CPU loading OS Support: Windows  10, Win 8, Win 7 and Mac OS

NEWlink USB2.0 Ethernet Adapter 10/100 Mbps

Compliant with USB 2.0 and USB 1.1 specifications Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards Supports both Full-Duplex and Half-Duplex operations Supports Wake-on-LAN function Powered by USB port only Equipped with diagnostic LEDs Plug & Play installation IBM compatible Pentium-233 MHz or faster PC or Mac Supports Windows 10, Win 8, Windows 7 and Mac OS X 10.x

USB1.1 Over Cat5e Extender

USB extension adapter Extend up to 45 metres No additional drivers required - Plug n Play Compatible with Windows XP, Win 7, Win 8 & Mac OS X and above