150m USB 2.0 Over Ethernet Extender - 4 Ports

Compatibility: USB 2.0, compatible with USB1.1, USB1.0 Transmission Rate: High-Speed (480 Mbps), Full-Speed (12 Mbps), Low-Speed (1.5Mbps) Transmission Distance: CAT5e ≤ 100m, CAT6 / 6A / 7 ≤ 150m Supports USB Hot-Plug Operating System: Windows, MacOS, Linux and Android 4x USB-A Input 1x USB-A Output Follows IEEE-568B standard

USB2.0 A to Lightning Braided Cable - MFI Certified

USB 2.0 Type A Lightning Connector 480Mbps Transfer Speed Black or White Braiding MFI certified 5v 2.4A

NEWlink USB2.0 Ethernet Adapter 10/100 Mbps

Compliant with USB 2.0 and USB 1.1 specifications Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards Supports both Full-Duplex and Half-Duplex operations Supports Wake-on-LAN function Powered by USB port only Plug & Play Supports Windows 10 and Mac OS X 10.x

NEWlink USB2.0 Type A (M) to Type B (M) Active Cable

Connectors: USB-A (male) to USB-B (male) Compliant with USB 2.0 High-Speed (480Mbps) Backwards compatible with USB 1.1 Plug-and-Play, no additional drivers required USB Bus powered Supports: Windows 7 or higher & Mac OS v9.0 or higher

NEWlink USB 2 MFI Certified Lightning Cable

USB 2.0 Lightning Connector White PVC Jacket Copper Cores OD 3.0

NEWlink 5m Active USB2.0 Extension Cable

Compliant with USB Specification 2.0 Data Transfer Rate: 1.5 / 12 / 480Mbps Length: 5m Active Extension Plug & Play Driverless Installation Supports Windows 10, 7 and Mac OS X

NEWlink USB 3D 7.1 Audio Adapter with MIC + Headphone Ports

Interface: USB 2 type A plug Support 3D Stereo sound 1x 3.5m for headphones or speakers 1x 3.5m for microphone (2 channel mono) Compliant with USB 2.0 full speed Function keys: Volume, Speaker and MIC mute LED status Plug and Play compatible No external power required No drivers required Supports Windows 10 and backwards compatible Supports Linux and Mac OS

USB 2.0 Gigabit Ethernet Adapter

Integrates on-chip USB 2.0 PHY and controller compliant to USB Spec 2.0, and 1.1 Supports USB Super/High/Full Speed modes with Bus-power Self-power device auto-detect capability Supports IEEE 802.3, 802.3u and 802.3ab Supports parallel detection and automatic polarity correction Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU loading Supports TCP Large Send Offload V1 Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control Supports IEEE 802.1P Layer 2 Priority Encoding and Decoding PHY loop-back diagnostic capability Supports Wake-on-LAN Function Supports suspend mode and remote wakeup via link-change, Magic Packet, Microsoft Wakeup Frame and external wakeup pin Supports up to Windows 11 and mac OS 12 ASIX AX88178A chipset

NEWlink USB2.0 High Speed 4 Port Hub

USB 2.0 Compliant 4 Port Supports High Speed (480MBps) Built-in 11cm USB Type A cable USB and ACPI Compliant Supports Over Current Protection Plug n Play Supports Windows 10, Win8, Win7, MAC OS 8.6/9.x/10.x and Linux 2.4+

NEWlink 4 Port USB2.0 Hub - Bus Powered

Specifications Fully compliant with USB2.0 (High Speed) specification Compatible with USB1.1 (Full Speed) specification Data transfer rates up to 480 Mbps (USB2.0) Individual port over-current protection Plug and Play, no driver installation required Hot-swappable Supports Windows 10, 8/8.1 and Win 7 Supports Mac OS 9.x and above Features 4x USB2.0 ports Portable design Bus powered Built-in USB cable (11cm)  

USB2.0 Hub - PSU

9/12 horizontally mounted and 1 foldable vertical 480Mbps ports Works seamlessly with your USB1.1 and USB2.0 devices Slim design, saves desk space Supports “hot swapping” of all your USB devices Backwards compatible with USB1.1 Supports data transfer rate at 1.5/12/480Mbps Plug n Play Supports Windows 10, Win 8, Win7, MAC OS 8.6/9.x/10.x and Linux 2.4+ Supplied with a 150cm USB A to B cable

50m USB 2.0 Over Cat5e Extender

Support for any High-Speed (480Mb/s), full-speed (12 Mb/s) or low-speed (1.5 Mb/s) USB devices Allows a USB device to have its cable length extended up to 50m Support suspend/resume detection Supports Hot Plug No software driver required Supports up to Windows 10

NEWlink USB 2.0 Active Extension Cable

USB 2.0 Compliant USB type A male to type A female Data transfer up to 480Mbps Plug n Play No power needed Windows 10 and older compatible

NEWlink 2 Port USB2.0 Hub - Bus Powered

Full compliance with USB 1.1 & USB 2.0 specifications. Supports Low Speed (1.5 Mbps) Full Speed (12 Mbps) and High Speed (480 Mbps) Data transfer rates Over current detection Driverless installation (uses Windows driver)

NEWlink USB2.0 High Speed 4 Port Hub

4 USB 2.0 Ports up to 100mA per port, or up to 500mA (with power adapter) Supports over current protection on each port. Provides 4 Type A Female and 1 Type B Female Connectors Supports High-Speed (480 Mbps), Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps) Compliant with USB specification Revision 2.0 Compliant with Windows 10, Win 8, Win 7 and below Power LED to indicate Self-power or Bus Power Supports Plug and Play

NEWlink USB2.0 Ethernet Adapter 10/100 Mbps

Compliant with USB 2.0 and USB 1.1 specifications Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards Supports both Full-Duplex and Half-Duplex operations Supports Wake-on-LAN function Powered by USB port only Equipped with diagnostic LEDs Plug & Play installation IBM compatible Pentium-233 MHz or faster PC or Mac Supports Windows 10, Win 8, Windows 7 and Mac OS X 10.x

USB 2.0 Active Extension Cable

USB 2.0 specification Extends up to 5 metres Plug n Play Bus powered Type A male to A female