2m DisplayPort (M) to VGA (M) Cable

Cable length: 2m Source connection: DisplayPort (Male) Display connection: VGA (Male) DisplayPort v1.1 compliant Maximum resolution: 1920x1080 @ 60Hz

Mini DisplayPort to HDMI, DVI, VGA Leaded Adapter

Supports Mini DisplayPort v1.2 Dual-mode input The HDMI port supports audio output(Note: Mini DP on some iMac and MacBook series cannot support audio output) Mini DP Port supports DP v1.2 (1.62 Gbps, 2.7 Gbps, 5.4 Gbps link rates) HDMI Output supports the following resolutions:- 4K x 2K, <24Hz, 25Hz, 30Hz>- 1080p, <24Hz, 50Hz, 60Hz>- 720p, 480p, 576i, 480i, DVI-D Output can reach 1.65Gbps per channel bandwidth and the following resolutions:- 1080p, <24Hz, 50Hz, 60Hz>- 720p, 480p, 576i, 480i, VGA Output can support a maximum resolution of 1920x1200, and the following resolutions:1920x1080, 1650x1200, 1650x1050, 1400x1050, 1280x768, 1280x720, 1024x768, 800x600, 640x480 If two or more output ports are connected, only one output port can receive the input signalThe output priorities are:1. DVI-D Port2. HDMI Port3. VGA Port Automatic Power Management: Enters power saving mode automatically when output display is not connected

15cm Leaded USB Type C to VGA Adapter

Supports USB-C input and VGA output Supports DisplayPort 1.2 Alt-mode Supports content protection of HDCP Supports VGA resolutions up to 1920x 1200 @60Hz / 2048x 1152 @60Hz USB-C female ports supplies power up to 60w (20v/3a) Supports per lane data rates of 5.4Gbps (HBR2), 2.7Gbps (HBR) and 1.62Gbps (RBR)  

Mini DisplayPort (M) to SVGA (M) Cable

Mini DisplayPort male to VGA male Mini display port 1.1a compliant (5.4Gbps) Triple 10-bit, 162 Mhz video DAC for VGA signal Supports up to 1080p, 1920 x 1200 resolution EDID pass-through from PC to display Spread spectrum for EMI reduction Automatic sync detection Low power standby mode Powered from display port 3.3v IO, 1.2v core 400mW active and 15mW standby

15cm Leaded USB Type C (M) to VGA (F) Adapter

Supports USB-C input and VGA output Flexible USB Type-C Switching Supports DisplayPort 1.2 Altmode Supports per lane data rates of 2.7Gbps (HBR) and 1.62Gbps (RBR)  Supports resolution up to 2048x1152 USB bus power (no external power supply) 15cm lead

DisplayPort to SVGA Adapter

DisplayPort Male (20 pin) to VGA Female (15 pin) DisplayPort v1.1 compliant Embedded clock architecture to reduce EMI susceptibility Supports resolutions greater than QXGA (2048 x 1536) at 24-bit colour depths Supports existing VESA and CEA standards Supports hot plug detection as well as link status failure Supports a minimum of 1080P resolution at 24bpp, 50/60 Hz at 15 metres Supports Display Port signal to VGA signal Supports video bandwidth up to 10.8Gbps Connector : 20pin Display Port to 15pin VGA

DisplayPort to SVGA Leaded Adapter

Cable length: 150mm DisplayPort v1.1 Compliant Supports 2048 x 1152 resolutions at 24-bit colour depths Compliant with existing VESA and Consumer Electronics Association standards Plug and play capabilities Supports up to and including 1080p at 24bpp, 50/60hz at a maximum cable length of 15 metres Can be used to convert from DisplayPort signal to a VGA signal Supports 8-bit and 10-bit deep colour Supports video bandwidth up to 10.8Gbps

Mini DisplayPort to SVGA Cable

Mini DisplayPort 1.1a Compliant (5.4Gbps) Triple 10-bit, 162 Mhz video DAC for VGA signal Supports up to 1080p, 1920 x 1200 resolution EDID pass-through from PC to display Spread spectrum for EMI reduction Automatic sync detection Low power standby mode Powered from DisplayPort 3.3v IO, 1.2v Core 400mW active and 15mW standby