DrayTek 12Gb Enterprise Grade High-Performance VPN Router with Multi-WAN Load-Balance and Failover Capabilities

Key Specifications Multi-WAN Router with over 12Gbps NAT Throughput 8x WAN/LAN Switchable Ports & 4x fixed Ethernet LAN Ports 2x 10GbE SFP+ and 2x 2.5GbE for WAN/LAN Up to 5Gbps Total IPSec VPN Throughput Up to 3.5Gbps Total SSL VPN Throughput 500 LAN-to-LAN & Remote Teleworker VPN Tunnels 200 DrayTek SSL VPN or OpenVPN Tunnels Up to 100 LAN Subnets with VLANs (Port-based / 802.1q) SPI Firewall and Content Filtering Optional VigorCare Available Compatible with VigorACS Central Management Platform

USB 2.0 Gigabit Ethernet Adapter

Integrates on-chip USB 2.0 PHY and controller compliant to USB Spec 2.0, and 1.1 Supports USB Super/High/Full Speed modes with Bus-power Self-power device auto-detect capability Supports IEEE 802.3, 802.3u and 802.3ab Supports parallel detection and automatic polarity correction Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU loading Supports TCP Large Send Offload V1 Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control Supports IEEE 802.1P Layer 2 Priority Encoding and Decoding PHY loop-back diagnostic capability Supports Wake-on-LAN Function Supports suspend mode and remote wakeup via link-change, Magic Packet, Microsoft Wakeup Frame and external wakeup pin Supports up to Windows 11 and mac OS 12 ASIX AX88178A chipset

NEWlink Gigabit Ethernet Switch

Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3ab standards Auto-Negotiation ports provide smart switching between 10Mbps, 100Mbps and 1000Mbps hardware Supports Auto-MDI/MDIX, eliminating the need for crossover cables Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode Supports MAC address auto-learning and auto-aging Non-blocking switching architecture enables full wire-speed packets forwarding and filtering Fanless design ensures quiet operation without disturbing your family Plug and Play design simplifies installation LED indicators for monitoring power, link and activity

NEWlink 10/100 Ethernet Hub/Switch

Complies with IEEE 802.3, IEEE 802.3u Five Auto-Negotiation  ports provide smart switching between 10Mbps and 100Mbps hardware Supports Auto-MDI/MDIX, eliminating the need for crossover cables Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode Supports MAC address auto-learning and auto-aging Non-blocking switching architecture enables full wire-speed packets forwarding and filtering Fanless design ensures quiet operation without disturbing your family Plug and Play design simplifies installation LED indicators for monitoring power, link and activity

NEWlink USB3.0 Gigabit Ethernet Adapter with Hub

Small, portable design Supports Wake-on-LAN function Supports Green Ethernet Supports IEEE 802.3az (Energy Efficient Ethernet) Supports IP v4 / IP v6 pack Checksum Offload Engine (COE) to reduce CPU loading OS Support: Windows  10, Win 8, Win 7 and Mac OS

NEWlink USB2.0 Ethernet Adapter 10/100 Mbps

Compliant with USB 2.0 and USB 1.1 specifications Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards Supports both Full-Duplex and Half-Duplex operations Supports Wake-on-LAN function Powered by USB port only Equipped with diagnostic LEDs Plug & Play installation IBM compatible Pentium-233 MHz or faster PC or Mac Supports Windows 10, Win 8, Windows 7 and Mac OS X 10.x

NEWlink RJ45 8P8C Hand Crimper

Modular plug, crimp, strip, and cutting tool Strips flat and round cable For 8P8C connectors only

NEWlink IDC Punch Down Tool

Integrated, spring loaded blade cuts off excess automatically Small hook to remove any existing wires from socket Small blade to cut and strip wires to a desired length Small blade to cut and strip wires to a desired length

NEWlink Adjustable Impact Punch Down Tool

Impact punch down tool Adjustable High pressure 15 ± 2Kg Low pressure 10 ± 2Kg Reversible blade

RJ45 Patch Cable Tester

Continuity tester for RJ45 (8P8C) UTP or STP Patch Cables Tests RJ11 (6P4C) and RJ12 (6P6C) Easy to read LED display Supplied with remote unit for testing installed wall ports Adjustable speed settings Maximum test length of up to 1000 ft (305 Mtrs)