150m USB 2.0 Over Ethernet Extender - 4 Ports

Compatibility: USB 2.0, compatible with USB1.1, USB1.0 Transmission Rate: High-Speed (480 Mbps), Full-Speed (12 Mbps), Low-Speed (1.5Mbps) Transmission Distance: CAT5e ≤ 100m, CAT6 / 6A / 7 ≤ 150m Supports USB Hot-Plug Operating System: Windows, MacOS, Linux and Android 4x USB-A Input 1x USB-A Output Follows IEEE-568B standard

3 Button Wireless Mouse

3 Button optical mouse Scroll wheel acts as 3rd button Wireless connection 2.4G Wireless dongle included 1000 dpi 2 x AAA batteries supplied Working distance 10m Supports up to Windows 11

NEWlink USB 3.0 Card Reader

Type A/C SuperSpeed data transfer (5Gbps) Backwards compatible with USB2.0/1.1 Plug and play (PNP) Read SD or Micro SD separately Supports SDXC (up to 32GB) and SDHC (up to 2TB) LED data transfer indicator Supports Windows 10 and older

NEWlink USB to Serial Adapter

Features Compliant with the USB 1.1 Specification Supports RS-232 Serial Interface Supports 500Kbps data transfer rate Detects USB Suspend Supports Plug & Play Specification USB Host drivers available Draws power directly from USB, no additional power adapter required Specification Prolific PL2303GT chipset Length: 20cm Upstream port: USB type A plug (Male) Downstream Port: D-Sub 9 Pin Connector (Male) Host Interface: USB BUS OS Supported: Windows 11, 10, 8/8.1, 7, Mac OS 9.1 or higher

120m HDMI Extender over 1x Patch Cable

Supports up to 1080p @ 50/60Hz Supports HDCP Supports 20~60KHz IR devices Supports local loop output Supports IR passback

NEWlink 4 Port USB3.0 Hub + Quick Charge Port - PSU

4 Port USB3.0 hub 1 Dedicated Quick Charging port for compatible devices A dedicated on/off switch on each port with LED indicator Plug & Play, hot-swappable No driver required Supports Windows 11 and below Supports MAC OSX 10.x and above Supports Linux

NEWlink 4 Port USB3.0 Ultra Mini Hub - Bus Powered

4 Port USB3.0 hub Data transfer rates up to 5 Gbps 10x Faster than USB2.0 Low power consumption Ultra slim design Plug & Play, hot-swappable No driver required Supports Windows 11 and below Supports MAC OSX 10.x and above Supports Linux

NEWlink USB 3D 7.1 Audio Adapter with MIC + Headphone Ports

Interface: USB 2 type A plug Support 3D Stereo sound 1x 3.5m for headphones or speakers 1x 3.5m for microphone (2 channel mono) Compliant with USB 2.0 full speed Function keys: Volume, Speaker and MIC mute LED status Plug and Play compatible No external power required No drivers required Supports Windows 10 and backwards compatible Supports Linux and Mac OS

USB1.1 Floppy Disk Drive

Compliant with the USB 1.1 Specification Supports 3.5 Inch 1.44Mb disks Plug and Play compatibility Supports up to Windows 10 Desktop or Laptop use No external power required. All power needed is drawn from the USB port

NEWlink USB2.0 High Speed 4 Port Hub

USB 2.0 Compliant 4 Port Supports High Speed (480MBps) Built-in 11cm USB Type A cable USB and ACPI Compliant Supports Over Current Protection Plug n Play Supports Windows 10, Win8, Win7, MAC OS 8.6/9.x/10.x and Linux 2.4+

NEWlink 4 Port USB2.0 Hub - Bus Powered

Specifications Fully compliant with USB2.0 (High Speed) specification Compatible with USB1.1 (Full Speed) specification Data transfer rates up to 480 Mbps (USB2.0) Individual port over-current protection Plug and Play, no driver installation required Hot-swappable Supports Windows 10, 8/8.1 and Win 7 Supports Mac OS 9.x and above Features 4x USB2.0 ports Portable design Bus powered Built-in USB cable (11cm)  

15cm Leaded USB Type C (M) to Gigabit Ethernet Adapter

Standard USB 3.1 Type-C interface Supports plug-and-play, no driver software is required Supports 10/100 /1000Mbps auto-detection Supports Wake-on-LAN and ‘Real Wow!’ (Wake-on-LAN)Technology Supports twisted pair crossover detection, auto-correction(HP Auto-MDIX) 15cm lead Up to Windows 11 supported MAC OS supported

15cm Leaded USB Type C (M) to 4x USB3.0 Type A (F) Hub

Support USB-C input and USB 3.0 output Support USB 3.1/3.0 super speed (5Gbps) transmission, downward compatible USB2.0 USB 3.1 interface supports plug and play, hot swap Support to connect four USB devices simultaneously Easy to carry and use 15cm lead

120m HDMI Extender over 1x Patch Cable

HDCP Compatible Supports IR passback Supports resolutions: 480i @60Hz, 480p @60Hz, 576i @50Hz, 576p @50Hz, 720p @50/60Hz, 1080i @50/60Hz and 1080p @50/60Hz Easy setup, plug and play

RJ45 Plug 8P8C

50 Microns Gold pins 2 Prongs on pins Unshielded

RJ45 Plug 8P8C (Bag of 100)

50 Microns Pack of 100 Gold pins 2 Prongs on pins Unshielded Cat5e

CAT6 RJ45 Plug 8P8C (Bag of 100)

50 Microns Gold pins 2 Prongs on pins Unshielded 3 Piece Bags of 100

Shielded RJ45 Plug (Bag of 100)

50 Microns Gold pins 2 Prongs on pins for 26awg wire Bags of 100 Shielded Cat5e

RJ11 Plug (6P4C)

Gold pins 2 Prongs on pins Unshielded

RJ12 Plug (6P6C)

Gold pins 2 Prongs on pins Unshielded

USB2.0 Hub - PSU

9/12 horizontally mounted and 1 foldable vertical 480Mbps ports Works seamlessly with your USB1.1 and USB2.0 devices Slim design, saves desk space Supports “hot swapping” of all your USB devices Backwards compatible with USB1.1 Supports data transfer rate at 1.5/12/480Mbps Plug n Play Supports Windows 10, Win 8, Win7, MAC OS 8.6/9.x/10.x and Linux 2.4+ Supplied with a 150cm USB A to B cable

50m USB 2.0 Over Cat5e Extender

Support for any High-Speed (480Mb/s), full-speed (12 Mb/s) or low-speed (1.5 Mb/s) USB devices Allows a USB device to have its cable length extended up to 50m Support suspend/resume detection Supports Hot Plug No software driver required Supports up to Windows 10

Rextron HDMI over LAN Extender

Extend HDMI signal by using exsisting LAN Up to 4 units to be displayed at one time Supports both clone and extend mode Support high resolutions up to UXGA (1600 x 1200) & Full HD (1920 x 1080) Supports Windows XP SP2 or SP 3, Vista, 7 and 8*

NEWlink 2 Port USB2.0 Hub - Bus Powered

Full compliance with USB 1.1 & USB 2.0 specifications. Supports Low Speed (1.5 Mbps) Full Speed (12 Mbps) and High Speed (480 Mbps) Data transfer rates Over current detection Driverless installation (uses Windows driver)

NEWlink USB2.0 High Speed 4 Port Hub

4 USB 2.0 Ports up to 100mA per port, or up to 500mA (with power adapter) Supports over current protection on each port. Provides 4 Type A Female and 1 Type B Female Connectors Supports High-Speed (480 Mbps), Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps) Compliant with USB specification Revision 2.0 Compliant with Windows 10, Win 8, Win 7 and below Power LED to indicate Self-power or Bus Power Supports Plug and Play

NEWlink USB2.0 Ethernet Adapter 10/100 Mbps

Compliant with USB 2.0 and USB 1.1 specifications Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards Supports both Full-Duplex and Half-Duplex operations Supports Wake-on-LAN function Powered by USB port only Equipped with diagnostic LEDs Plug & Play installation IBM compatible Pentium-233 MHz or faster PC or Mac Supports Windows 10, Win 8, Windows 7 and Mac OS X 10.x

NEWlink RJ45 8P8C Hand Crimper

Modular plug, crimp, strip, and cutting tool Strips flat and round cable For 8P8C connectors only

USB1.1 Over Cat5e Extender

USB extension adapter Extend up to 45 metres No additional drivers required - Plug n Play Compatible with Windows XP, Win 7, Win 8 & Mac OS X and above