NEWlink 50Mtr USB 1.1 Extender Over Cat5e

Compliant with the standard specification of USB1.1 Patented ASIC (Application Specific Integrated Circuits) built-in 10/100 Base-T Ethernet interfaces for easy extension No driver required Supports Windows 10/11 Supports Mac OS 9.x or above Maximum length: 50m

150m USB 2.0 Over Ethernet Extender - 4 Ports

Compatibility: USB 2.0, compatible with USB1.1, USB1.0 Transmission Rate: High-Speed (480 Mbps), Full-Speed (12 Mbps), Low-Speed (1.5Mbps) Transmission Distance: CAT5e ≤ 100m, CAT6 / 6A / 7 ≤ 150m Supports USB Hot-Plug Operating System: Windows, MacOS, Linux and Android 4x USB-A Input 1x USB-A Output Follows IEEE-568B standard

70m HDMI v2.0 Extender over Single Patch Cable

HDMI Version: HDMI 2.0 (HDMI 1.4 compatible) HDCP Version: HDCP 2.2 (HDCP 1.4 compatible) Transmission Medium: Cat6 / Cat6A / Cat7 Transmission Distance: Up to 70 metres Video Bandwidth: 18Gbps Max Input Cable Length: 8m (24AWG) Max Output Cable Length: 8m (24AWG) Audio Support: LPCM / DTS-HD / DTS-Audio / Dolby Digital 5.1CH

120m HDMI Extender over 1x Patch Cable

Supports up to 1080p @ 50/60Hz Supports HDCP Supports 20~60KHz IR devices Supports local loop output Supports IR passback

USB 2.0 Gigabit Ethernet Adapter

Integrates on-chip USB 2.0 PHY and controller compliant to USB Spec 2.0, and 1.1 Supports USB Super/High/Full Speed modes with Bus-power Self-power device auto-detect capability Supports IEEE 802.3, 802.3u and 802.3ab Supports parallel detection and automatic polarity correction Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU loading Supports TCP Large Send Offload V1 Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control Supports IEEE 802.1P Layer 2 Priority Encoding and Decoding PHY loop-back diagnostic capability Supports Wake-on-LAN Function Supports suspend mode and remote wakeup via link-change, Magic Packet, Microsoft Wakeup Frame and external wakeup pin Supports up to Windows 11 and mac OS 12 ASIX AX88178A chipset

120m HDMI Extender over 1x Patch Cable (4K)

Supports resolutions up to ultra HD 4K x 2K @ 30Hz Transmits up to 120mtrs Uses a single Cat5/Cat5e or CAT6 cable Supports IR signal 20kHz to 60kHz Supports standard audio, Direct Stream Digital (DSD) and HD (HBR) audio Metal heat sink design HDMI1.4 and HDCP1.4 compliant

50m USB 2.0 Over Cat5e Extender

Support for any High-Speed (480Mb/s), full-speed (12 Mb/s) or low-speed (1.5 Mb/s) USB devices Allows a USB device to have its cable length extended up to 50m Support suspend/resume detection Supports Hot Plug No software driver required Supports up to Windows 10

Rextron HDMI over LAN Extender

Extend HDMI signal by using exsisting LAN Up to 4 units to be displayed at one time Supports both clone and extend mode Support high resolutions up to UXGA (1600 x 1200) & Full HD (1920 x 1080) Supports Windows XP SP2 or SP 3, Vista, 7 and 8*

NEWlink USB3.0 Gigabit Ethernet Adapter with Hub

Small, portable design Supports Wake-on-LAN function Supports Green Ethernet Supports IEEE 802.3az (Energy Efficient Ethernet) Supports IP v4 / IP v6 pack Checksum Offload Engine (COE) to reduce CPU loading OS Support: Windows  10, Win 8, Win 7 and Mac OS

NEWlink USB2.0 Ethernet Adapter 10/100 Mbps

Compliant with USB 2.0 and USB 1.1 specifications Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards Supports both Full-Duplex and Half-Duplex operations Supports Wake-on-LAN function Powered by USB port only Equipped with diagnostic LEDs Plug & Play installation IBM compatible Pentium-233 MHz or faster PC or Mac Supports Windows 10, Win 8, Windows 7 and Mac OS X 10.x

USB1.1 Over Cat5e Extender

USB extension adapter Extend up to 45 metres No additional drivers required - Plug n Play Compatible with Windows XP, Win 7, Win 8 & Mac OS X and above