NEWlink USB 3.0 Card Reader

Type A/C SuperSpeed data transfer (5Gbps) Backwards compatible with USB2.0/1.1 Plug and play (PNP) Read SD or Micro SD separately Supports SDXC (up to 32GB) and SDHC (up to 2TB) LED data transfer indicator Supports Windows 10 and older

120m HDMI Extender over 1x Patch Cable

Supports up to 1080p @ 50/60Hz Supports HDCP Supports 20~60KHz IR devices Supports local loop output Supports IR passback

NEWlink USB2.0 High Speed 4 Port Hub

USB 2.0 Compliant 4 Port Supports High Speed (480MBps) Built-in 11cm USB Type A cable USB and ACPI Compliant Supports Over Current Protection Plug n Play Supports Windows 10, Win8, Win7, MAC OS 8.6/9.x/10.x and Linux 2.4+

NEWlink 4 Port USB2.0 Hub - Bus Powered

Specifications Fully compliant with USB2.0 (High Speed) specification Compatible with USB1.1 (Full Speed) specification Data transfer rates up to 480 Mbps (USB2.0) Individual port over-current protection Plug and Play, no driver installation required Hot-swappable Supports Windows 10, 8/8.1 and Win 7 Supports Mac OS 9.x and above Features 4x USB2.0 ports Portable design Bus powered Built-in USB cable (11cm)  

120m HDMI Extender over 1x Patch Cable

HDCP Compatible Supports IR passback Supports resolutions: 480i @60Hz, 480p @60Hz, 576i @50Hz, 576p @50Hz, 720p @50/60Hz, 1080i @50/60Hz and 1080p @50/60Hz Easy setup, plug and play

USB2.0 Hub - PSU

9/12 horizontally mounted and 1 foldable vertical 480Mbps ports Works seamlessly with your USB1.1 and USB2.0 devices Slim design, saves desk space Supports “hot swapping” of all your USB devices Backwards compatible with USB1.1 Supports data transfer rate at 1.5/12/480Mbps Plug n Play Supports Windows 10, Win 8, Win7, MAC OS 8.6/9.x/10.x and Linux 2.4+ Supplied with a 150cm USB A to B cable

50m USB 2.0 Over Cat5e Extender

Support for any High-Speed (480Mb/s), full-speed (12 Mb/s) or low-speed (1.5 Mb/s) USB devices Allows a USB device to have its cable length extended up to 50m Support suspend/resume detection Supports Hot Plug No software driver required Supports up to Windows 10

Rextron HDMI over LAN Extender

Extend HDMI signal by using exsisting LAN Up to 4 units to be displayed at one time Supports both clone and extend mode Support high resolutions up to UXGA (1600 x 1200) & Full HD (1920 x 1080) Supports Windows XP SP2 or SP 3, Vista, 7 and 8*

NEWlink 2 Port USB2.0 Hub - Bus Powered

Full compliance with USB 1.1 & USB 2.0 specifications. Supports Low Speed (1.5 Mbps) Full Speed (12 Mbps) and High Speed (480 Mbps) Data transfer rates Over current detection Driverless installation (uses Windows driver)

NEWlink USB2.0 Ethernet Adapter 10/100 Mbps

Compliant with USB 2.0 and USB 1.1 specifications Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards Supports both Full-Duplex and Half-Duplex operations Supports Wake-on-LAN function Powered by USB port only Equipped with diagnostic LEDs Plug & Play installation IBM compatible Pentium-233 MHz or faster PC or Mac Supports Windows 10, Win 8, Windows 7 and Mac OS X 10.x

USB1.1 Over Cat5e Extender

USB extension adapter Extend up to 45 metres No additional drivers required - Plug n Play Compatible with Windows XP, Win 7, Win 8 & Mac OS X and above