USB Type C to 2 Port USB Hub & Card Reader with PD Function

USB-C (Male) Connects to the host device USB-A (Female) x2 Support USB 5Gbps data transmission One of the two USB-A ports supports max 8W (5V/1.6A) downstream charging SD Slot x1 / Micro SD Slot x1 Support Secure Digital v3.0 UHS-I (Ultra High Speed): SDR12 (12.5Mbyte/s) / SDR25 (25Mbyte/s) / SDR50 (50Mbyte/s) / DDR50 (50Mbyte/s) / SDR104 (104Mbyte/s) SD/Micro SD slots to work simultaneously USB-C (Female) x1 Power Delivery 3.0 Port

150m USB 2.0 Over Ethernet Extender - 4 Ports

Compatibility: USB 2.0, compatible with USB1.1, USB1.0 Transmission Rate: High-Speed (480 Mbps), Full-Speed (12 Mbps), Low-Speed (1.5Mbps) Transmission Distance: CAT5e ≤ 100m, CAT6 / 6A / 7 ≤ 150m Supports USB Hot-Plug Operating System: Windows, MacOS, Linux and Android 4x USB-A Input 1x USB-A Output Follows IEEE-568B standard

USB to Serial Adapter with FTDI Chipset

USB Bus Powered Supports USB2.0 Backwards compatible with USB1.1 and 1.0 Supports Windows 11 / 10, 8 / Linux & Mac Transmission Speed: 2400-115200bps Supports RS-232 Serial Interface

NEWlink USB to Serial Adapter

Features Compliant with the USB 1.1 Specification Supports RS-232 Serial Interface Supports 500Kbps data transfer rate Detects USB Suspend Supports Plug & Play Specification USB Host drivers available Draws power directly from USB, no additional power adapter required Specification Prolific PL2303GT chipset Length: 20cm Upstream port: USB type A plug (Male) Downstream Port: D-Sub 9 Pin Connector (Male) Host Interface: USB BUS OS Supported: Windows 11, 10, 8/8.1, 7, Mac OS 9.1 or higher

NEWlink 4 Port USB3.0 Hub + Quick Charge Port - PSU

4 Port USB3.0 hub 1 Dedicated Quick Charging port for compatible devices A dedicated on/off switch on each port with LED indicator Plug & Play, hot-swappable No driver required Supports Windows 11 and below Supports MAC OSX 10.x and above Supports Linux

NEWlink 4 Port USB3.0 Ultra Mini Hub - Bus Powered

4 Port USB3.0 hub Data transfer rates up to 5 Gbps 10x Faster than USB2.0 Low power consumption Ultra slim design Plug & Play, hot-swappable No driver required Supports Windows 11 and below Supports MAC OSX 10.x and above Supports Linux

NEWlink USB 3D 7.1 Audio Adapter with MIC + Headphone Ports

Interface: USB 2 type A plug Support 3D Stereo sound 1x 3.5m for headphones or speakers 1x 3.5m for microphone (2 channel mono) Compliant with USB 2.0 full speed Function keys: Volume, Speaker and MIC mute LED status Plug and Play compatible No external power required No drivers required Supports Windows 10 and backwards compatible Supports Linux and Mac OS

USB 2.0 Gigabit Ethernet Adapter

Integrates on-chip USB 2.0 PHY and controller compliant to USB Spec 2.0, and 1.1 Supports USB Super/High/Full Speed modes with Bus-power Self-power device auto-detect capability Supports IEEE 802.3, 802.3u and 802.3ab Supports parallel detection and automatic polarity correction Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU loading Supports TCP Large Send Offload V1 Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control Supports IEEE 802.1P Layer 2 Priority Encoding and Decoding PHY loop-back diagnostic capability Supports Wake-on-LAN Function Supports suspend mode and remote wakeup via link-change, Magic Packet, Microsoft Wakeup Frame and external wakeup pin Supports up to Windows 11 and mac OS 12 ASIX AX88178A chipset

NEWlink USB2.0 High Speed 4 Port Hub

USB 2.0 Compliant 4 Port Supports High Speed (480MBps) Built-in 11cm USB Type A cable USB and ACPI Compliant Supports Over Current Protection Plug n Play Supports Windows 10, Win8, Win7, MAC OS 8.6/9.x/10.x and Linux 2.4+

NEWlink 4 Port USB2.0 Hub - Bus Powered

Specifications Fully compliant with USB2.0 (High Speed) specification Compatible with USB1.1 (Full Speed) specification Data transfer rates up to 480 Mbps (USB2.0) Individual port over-current protection Plug and Play, no driver installation required Hot-swappable Supports Windows 10, 8/8.1 and Win 7 Supports Mac OS 9.x and above Features 4x USB2.0 ports Portable design Bus powered Built-in USB cable (11cm)  

USB Type-C to 3 Port USB Hub & Card Reader

Supports USB-C Male, 3x USB 3.0 Female, SD /MMC card, Micro SD card interface Supports to connect 3 USB 3.0 supported devices simultaneously The max total output of the 3 USB outputs is 900mAh Support USB 3.0 Super Speed (5Gbps) transmission, backwards compatible with USB2.0 Supports USB-C input, USB 3.0 output USB 3.0 port supports to charge and transmit data for the USB device simultaneously Supports SD/SDHC/SDXC Supports Secure Digital v3.0 UHS-I (Reading speed max 70Mbps, Writing speed max 90Mbps) Supports MultiMediaCard (MMC) specification Supports Micro SD/SDHC/SDXC (up to 128 GB)

15cm Leaded USB Type C (M) to Gigabit Ethernet Adapter

Standard USB 3.1 Type-C interface Supports plug-and-play, no driver software is required Supports 10/100 /1000Mbps auto-detection Supports Wake-on-LAN and ‘Real Wow!’ (Wake-on-LAN)Technology Supports twisted pair crossover detection, auto-correction(HP Auto-MDIX) 15cm lead Up to Windows 11 supported MAC OS supported

15cm Leaded USB Type C (M) to 4x USB3.0 Type A (F) Hub

Support USB-C input and USB 3.0 output Support USB 3.1/3.0 super speed (5Gbps) transmission, downward compatible USB2.0 USB 3.1 interface supports plug and play, hot swap Support to connect four USB devices simultaneously Easy to carry and use 15cm lead

50m USB 2.0 Over Cat5e Extender

Support for any High-Speed (480Mb/s), full-speed (12 Mb/s) or low-speed (1.5 Mb/s) USB devices Allows a USB device to have its cable length extended up to 50m Support suspend/resume detection Supports Hot Plug No software driver required Supports up to Windows 10

NEWlink USB3.0 Gigabit Ethernet Adapter with Hub

Small, portable design Supports Wake-on-LAN function Supports Green Ethernet Supports IEEE 802.3az (Energy Efficient Ethernet) Supports IP v4 / IP v6 pack Checksum Offload Engine (COE) to reduce CPU loading OS Support: Windows  10, Win 8, Win 7 and Mac OS

NEWlink 2 Port USB2.0 Hub - Bus Powered

Full compliance with USB 1.1 & USB 2.0 specifications. Supports Low Speed (1.5 Mbps) Full Speed (12 Mbps) and High Speed (480 Mbps) Data transfer rates Over current detection Driverless installation (uses Windows driver)

NEWlink USB2.0 High Speed 4 Port Hub

4 USB 2.0 Ports up to 100mA per port, or up to 500mA (with power adapter) Supports over current protection on each port. Provides 4 Type A Female and 1 Type B Female Connectors Supports High-Speed (480 Mbps), Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps) Compliant with USB specification Revision 2.0 Compliant with Windows 10, Win 8, Win 7 and below Power LED to indicate Self-power or Bus Power Supports Plug and Play

NEWlink USB2.0 Ethernet Adapter 10/100 Mbps

Compliant with USB 2.0 and USB 1.1 specifications Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards Supports both Full-Duplex and Half-Duplex operations Supports Wake-on-LAN function Powered by USB port only Equipped with diagnostic LEDs Plug & Play installation IBM compatible Pentium-233 MHz or faster PC or Mac Supports Windows 10, Win 8, Windows 7 and Mac OS X 10.x