USB 2.0 Gigabit Ethernet Adapter

Integrates on-chip USB 2.0 PHY and controller compliant to USB Spec 2.0, and 1.1 Supports USB Super/High/Full Speed modes with Bus-power Self-power device auto-detect capability Supports IEEE 802.3, 802.3u and 802.3ab Supports parallel detection and automatic polarity correction Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU loading Supports TCP Large Send Offload V1 Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control Supports IEEE 802.1P Layer 2 Priority Encoding and Decoding PHY loop-back diagnostic capability Supports Wake-on-LAN Function Supports suspend mode and remote wakeup via link-change, Magic Packet, Microsoft Wakeup Frame and external wakeup pin Supports up to Windows 11 and mac OS 12 ASIX AX88178A chipset

RJ45 Full Rollover Coupler

Full crossover spec 50 Microns Gold pins 2 Prongs on pins Unshielded

RJ45 Straight Through Coupler

RJ45 Straight Coupler 50 Microns Gold pins Unshielded

Cat6 RJ45 Straight Coupler

RJ45 Straight Mini Inline Coupler 50 Microns Gold pins Unshielded

Cat5e RJ45 Straight Coupler

RJ45 Straight Coupler CAT 5E 50 Microns Gold pins Unshielded

RJ45 Crossover Cable Adapter

RJ45 Crossover Adapter 50 Microns Gold pins Unshielded

RJ11 Straight Coupler (6P4C)

RJ11 6P4C Straight Coupler Gold pins 2 Prongs on pins Unshielded

NEWlink USB2.0 Ethernet Adapter 10/100 Mbps

Compliant with USB 2.0 and USB 1.1 specifications Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards Supports both Full-Duplex and Half-Duplex operations Supports Wake-on-LAN function Powered by USB port only Equipped with diagnostic LEDs Plug & Play installation IBM compatible Pentium-233 MHz or faster PC or Mac Supports Windows 10, Win 8, Windows 7 and Mac OS X 10.x