NEWlink USB to Serial Adapter

Features Compliant with the USB 1.1 Specification Supports RS-232 Serial Interface Supports 500Kbps data transfer rate Detects USB Suspend Supports Plug & Play Specification USB Host drivers available Draws power directly from USB, no additional power adapter required Specification Prolific PL2303GT chipset Length: 20cm Upstream port: USB type A plug (Male) Downstream Port: D-Sub 9 Pin Connector (Male) Host Interface: USB BUS OS Supported: Windows 11, 10, 8/8.1, 7, Mac OS 9.1 or higher

NEWlink 4 Port USB3.0 Hub + Quick Charge Port - PSU

4 Port USB3.0 hub 1 Dedicated Quick Charging port for compatible devices A dedicated on/off switch on each port with LED indicator Plug & Play, hot-swappable No driver required Supports Windows 11 and below Supports MAC OSX 10.x and above Supports Linux

NEWlink 4 Port USB3.0 Ultra Mini Hub - Bus Powered

4 Port USB3.0 hub Data transfer rates up to 5 Gbps 10x Faster than USB2.0 Low power consumption Ultra slim design Plug & Play, hot-swappable No driver required Supports Windows 11 and below Supports MAC OSX 10.x and above Supports Linux

NEWlink USB 3D 7.1 Audio Adapter with MIC + Headphone Ports

Interface: USB 2 type A plug Support 3D Stereo sound 1x 3.5m for headphones or speakers 1x 3.5m for microphone (2 channel mono) Compliant with USB 2.0 full speed Function keys: Volume, Speaker and MIC mute LED status Plug and Play compatible No external power required No drivers required Supports Windows 10 and backwards compatible Supports Linux and Mac OS

NEWlink USB2.0 High Speed 4 Port Hub

USB 2.0 Compliant 4 Port Supports High Speed (480MBps) Built-in 11cm USB Type A cable USB and ACPI Compliant Supports Over Current Protection Plug n Play Supports Windows 10, Win8, Win7, MAC OS 8.6/9.x/10.x and Linux 2.4+

NEWlink 4 Port USB2.0 Hub - Bus Powered

Specifications Fully compliant with USB2.0 (High Speed) specification Compatible with USB1.1 (Full Speed) specification Data transfer rates up to 480 Mbps (USB2.0) Individual port over-current protection Plug and Play, no driver installation required Hot-swappable Supports Windows 10, 8/8.1 and Win 7 Supports Mac OS 9.x and above Features 4x USB2.0 ports Portable design Bus powered Built-in USB cable (11cm)  

NEWlink 2 Port USB2.0 Hub - Bus Powered

Full compliance with USB 1.1 & USB 2.0 specifications. Supports Low Speed (1.5 Mbps) Full Speed (12 Mbps) and High Speed (480 Mbps) Data transfer rates Over current detection Driverless installation (uses Windows driver)

NEWlink USB2.0 High Speed 4 Port Hub

4 USB 2.0 Ports up to 100mA per port, or up to 500mA (with power adapter) Supports over current protection on each port. Provides 4 Type A Female and 1 Type B Female Connectors Supports High-Speed (480 Mbps), Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps) Compliant with USB specification Revision 2.0 Compliant with Windows 10, Win 8, Win 7 and below Power LED to indicate Self-power or Bus Power Supports Plug and Play

NEWlink USB2.0 Ethernet Adapter 10/100 Mbps

Compliant with USB 2.0 and USB 1.1 specifications Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards Supports both Full-Duplex and Half-Duplex operations Supports Wake-on-LAN function Powered by USB port only Equipped with diagnostic LEDs Plug & Play installation IBM compatible Pentium-233 MHz or faster PC or Mac Supports Windows 10, Win 8, Windows 7 and Mac OS X 10.x